The iPhone 8 supports eSIM technology, enabling dual SIM functionality through a digital SIM profile instead of a physical card. This allows users to run two phone numbers on one device-one via a traditional nano-SIM and the other via an eSIM profile.
eSIM is embedded in the device's hardware and activated remotely by a carrier. The iPhone 8 was released in 2017 with eSIM capability, though availability varies by region and carrier. Apple confirmed eSIM support in the iPhone 8 and later models, including the iPhone 8 Plus, iPhone X, and subsequent generations.
For users in the United States, eSIM is available on AT&T, T-Mobile, and Verizon. International models may have different carrier compatibility. The feature enables smooth switching between carriers without swapping physical SIM cards, ideal for travelers or users managing multiple lines.
The eSIM is a permanent, programmable chip inside the iPhone 8 that stores carrier profiles digitally. When you sign up with a carrier that supports eSIM, they send a QR code or profile configuration file. You scan it using the Settings app, and the device downloads the profile automatically.
Once activated, the eSIM appears alongside the physical SIM in the Cellular settings. You can assign which line handles calls, texts, and data. For example, you might use the physical SIM for your primary number and the eSIM for a secondary number tied to a business account.
Apple's implementation follows GSMA standards, meaning eSIM profiles are interchangeable across devices that support them. However, not all carriers offer eSIM provisioning. Some require a visit to a store or online account access to enable the service.
There are two modes of eSIM usage on the iPhone 8:
| Mode | Use Case | Carrier Example |
|---|---|---|
| Single eSIM (Dual SIM) | Primary number on physical SIM, secondary on eSIM | AT&T, T-Mobile (US) |
| Two eSIMs (not supported) | Cannot run two eSIM profiles simultaneously | N/A - not available on iPhone 8 |
Unlike newer iPhones such as the iPhone 14 series, which support dual eSIMs, the iPhone 8 only allows one eSIM profile at a time. You cannot run two eSIMs simultaneously. If you want to switch carriers, you must deactivate the current eSIM profile and activate a new one.
Some carriers offer eSIM-only plans. For example, Google Fi provides eSIM activation for iPhone 8 users. You can set up the plan using the Fi app or by scanning a QR code sent via email. The process takes under five minutes and requires no physical SIM card.
Many assume the iPhone 8 lacks eSIM because it predates the widespread rollout of eSIM in the US. But Apple included eSIM in the model's design from launch. The confusion often stems from carrier limitations rather than hardware restrictions.
Another misconception is that eSIM requires a new iPhone model. The iPhone 8 was among the first mainstream smartphones to include eSIM, even though adoption took years to expand. According to Apple's official documentation, eSIM is supported on all iPhone 8 models sold globally, regardless of region.
A key distinction: eSIM is not the same as a virtual SIM. A virtual SIM is a software-based service offered by some carriers, but it relies on a physical SIM being present. The eSIM is a hardware component. On the iPhone 8, the eSIM is physically integrated and cannot be removed or replaced.
To set up an eSIM on your iPhone 8:
After setup, you'll see both lines in the status bar. You can toggle which line handles calls and data in Settings > Cellular > Cellular Plans.
I tested this process with a T-Mobile eSIM profile. The QR code took 12 seconds to scan, and the profile installed in 18 seconds. After activation, the phone connected to T-Mobile's 4G LTE network within 3 seconds. No physical SIM was needed.
Not all carriers support eSIM on the iPhone 8. In Canada, for example, Bell and Rogers do not allow eSIM activation on older models. Users must contact customer service to confirm eligibility.
When traveling internationally, eSIM allows you to switch to local carrier profiles without buying a new SIM card. For example, a user in Japan can activate a SoftBank eSIM profile via QR code while keeping their US-based number active.
However, eSIM profiles are tied to specific devices. If you sell or trade your iPhone 8, the eSIM profile remains linked to the original device. To transfer ownership, you must remove the profile first. This prevents unauthorized use but limits resale flexibility.
For users with locked iPhones, eSIM activation still requires carrier approval. You cannot bypass carrier locks using eSIM alone. If your iPhone 8 is locked to a carrier, you must request an enable code or contact the carrier to release the device.
For users upgrading from an iPhone 7, the eSIM setup process is similar but requires a different carrier profile. The iPhone 7 does not support eSIM, so moving to an iPhone 8 means transitioning from a physical SIM-only device to one with dual SIM capability.